REP Fitness QuickDraw Adjustable Dumbbells: Specs and Sizes

Contents13

• Space savings versus a fixed dumbbell rack
• Weight range and increments
• Dimensions
• Lock-N-Load mechanism
• Expansion: the 10 lb add-on kit
• Build materials: mostly steel, with plastic where it reduces wear
• Durability: independently drop-tested, lifetime warranty
• How the QuickDraw compares on the three things that matter
• Storage footprint: cradle plus dumbbells, not just the dumbbells
• The one recurring tradeoff across independent write-ups
• Maintenance: what to check periodically
• Buying criteria: which ceiling to actually buy
• Who this fits

REP Fitness sells its QuickDraw adjustable dumbbell as four separate pairs, split by top weight — 30, 40, 50 or 60 lb per hand — all starting at 5 lb and moving in 2.5 lb steps (REP Fitness).

Space savings versus a fixed dumbbell rack

REP's own positioning for the QuickDraw is that one 60 lb pair, adjusting in 5 lb increments, replaces 12 separate pairs of fixed dumbbells spanning 5 to 60 lb (REP Fitness). That's the core pitch for a compact home gym: instead of a rack holding 24 individual dumbbells, you're storing two dumbbells and their shared cradle. The tradeoff, covered in the dimensions section below, is that the two dumbbells you keep are longer than a fixed 60 lb dumbbell would be, so the space savings comes from eliminating the rack, not from the two units themselves being tiny.

Weight range and increments

Every QuickDraw pair starts at 5 lb per hand; the difference between the four options is where they stop — 30, 40, 50 or 60 lb. All four move in 2.5 lb increments using the same Lock-N-Load steel switch mechanism (REP Fitness). That's a finer step than the 5 lb or larger jumps common on twist-handle competitors, since you're flipping individual plate switches rather than rotating past fixed stops.

Dimensions

REP states the QuickDraw reaches just over 18 inches long at its maximum loaded length, with the lineup running from roughly 12.2 to 18.3 inches long depending on which ceiling weight you buy — the higher the max weight, the longer the loaded dumbbell (REP Fitness). The storage cradle measures about 20.6 x 8.45 inches, per Garage Gym Reviews' own hands-on measurement of the unit (REP's page doesn't publish a cradle dimension).

Lock-N-Load mechanism

Each stacked plate carries its own steel switch. Flipping a switch locks that plate onto the handle or releases it back into the cradle. You can flip switches one at a time for small 2.5 or 5 lb changes, or flip a run of them together for a fast 10 lb jump between exercises (REP Fitness). REP states the switches are cycle-tested past 100,000 uses. The handle itself is 32 mm with a fully knurled volcano pattern (REP Fitness); Garage Gym Reviews' hands-on teardown additionally describes the handle as nickel-plated steel, reinforced by two powder-coated support rods.

Garage Gym Reviews' hands-on testing describes the QuickDraw's knurling as noticeably more passive than an Olympic barbell's — the reviewers reported that the gentler knurl worked better in their testing for fast, dynamic dumbbell movements like snatches or quick supersets, where an aggressive barbell-style grip would chew up your hands over repeated reps. If you specifically want the most aggressive grip possible, this isn't it; if you want secure but comfortable contact through fast rep ranges, it's a reasonable tradeoff.

REP's Lock-N-Load approach sits at the opposite end of the adjustment-speed spectrum from Ironmaster's Quick-Lock. Ironmaster uses hand-turned locking screws with no plastic anywhere in the load path, which Garage Gym Reviews rates as the more indestructible design long-term, but changing weight takes noticeably longer since you're turning screws by hand rather than flipping a switch. REP's switches trade a small amount of plastic (used only to reduce wear at friction points, not as a structural part) for a weight change that takes a fraction of the time. Neither approach is objectively better — it depends on whether you value speed between sets more than an all-metal build with zero plastic anywhere. See our Ironmaster adjustable dumbbells page for its full spec sheet if the screw-based approach is a better fit for how you train.

Expansion: the 10 lb add-on kit

REP sells a 10 lb add-on weight plate kit for the QuickDraw that extends the 60 lb pair to 70 lb per hand (Amazon product listing, REP Fitness) — useful if you buy the top-tier pair now and outgrow it later, without buying an entirely new dumbbell. Garage Gym Reviews notes the add-on plates are slower to attach and remove than the main switch mechanism, since they're a separate piece rather than a built-in setting, so treat the 70 lb ceiling as a real but slightly less convenient step up from the base 60 lb pair.

Build materials: mostly steel, with plastic where it reduces wear

REP builds the QuickDraw around a fully knurled, volcano-pattern handle at 32 mm diameter (REP Fitness); Garage Gym Reviews' hands-on teardown describes it as nickel-plated steel, reinforced by two steel support rods running along one side of the handle. Each stacked plate carries its own steel Lock-N-Load switch. The one deliberate exception to the all-metal build is a small number of plastic pieces placed specifically to cut down metal-on-metal wear between the plates and the switch mechanism — a wear-reduction choice, not a load-bearing part. That's a different tradeoff than Ironmaster's Quick-Lock system, which uses no plastic anywhere in its load path but adjusts more slowly by hand.

Durability: independently drop-tested, lifetime warranty

Garage Gym Reviews put the QuickDraw through drop tests from 18 inches up to more than 4 feet at multiple angles, including a roof-level drop, and reported both the dumbbells and the plastic storage cradle survived intact, describing them as "tanks" that took the impact without cracking. REP backs the dumbbell with a lifetime warranty covering defects in material, functionality and workmanship — though the warranty doesn't transfer to a second owner, which matters if you're weighing a used listing against buying new. REP's return window is 30 days with original packaging and complete hardware, and a 15% restocking fee applies to a return that's already been used.

How the QuickDraw compares on the three things that matter

The QuickDraw is the longest of the three at a comparable weight, which matters most on floor-level moves like rows or presses where dumbbell length affects range of motion — check that dimension against your specific exercises, not just the weight ceiling.

Storage footprint: cradle plus dumbbells, not just the dumbbells

The published cradle dimensions — about 20.6 by 8.45 inches — are the number to plan a shelf or floor spot around, not the dumbbell length alone, since the pair rests in that cradle between sets rather than standing free. That's roughly the footprint of a large shoebox, small enough for a closet shelf or the corner of a garage gym, but worth measuring against your specific spot before buying, especially if you're stacking the cradle under a bench or next to a rack where clearance is already tight. Because the cradle stays the same size regardless of which ceiling pair you buy (30, 40, 50 or 60 lb), the storage planning doesn't change if you upgrade to a higher-ceiling pair later — only the dumbbells themselves get incrementally heavier and slightly longer at the top end.

The one recurring tradeoff across independent write-ups

Reviewers who've handled the QuickDraw consistently flag the same tradeoff: it's longer at the top of its range than the Bowflex SelectTech 552 or NordicTrack's Select-a-Weight at a comparable weight, which is the cost of its flip-switch mechanism and steel support rods. That length difference is the one specific, repeated observation worth weighing against the switch speed and drop-test durability covered above — not a general quality judgment, just a real dimensional tradeoff worth checking against your own bench or rack clearance.

Maintenance: what to check periodically

REP's Lock-N-Load switches are steel-on-steel where they contact the plate, with the plastic wear-reduction pieces noted above sitting at the friction points. Neither REP nor Garage Gym Reviews' review publishes a lubrication schedule, but the general pattern with any switch- or pin-based adjustable dumbbell is the same: periodically check that each switch flips fully into the locked position before lifting, since a partially-locked switch on a stacked-plate system is the actual failure mode reviewers warn about (not the housing cracking). Keep the dumbbells out of standing moisture given the amount of exposed steel in the handle, support rods and switches — REP doesn't publish a specific rust warranty exclusion for this model, but chrome- and nickel-plated steel components generally aren't warrantied against corrosion from neglect the way a mechanical defect is.

Buying criteria: which ceiling to actually buy

REP sells the QuickDraw as four separate pairs rather than one unit covering the full range, so the ceiling decision happens at purchase, not later:

• Pick 30 or 40 lb if you're using these mainly for accessory work — curls, lateral raises, rows — where you rarely load past the low-to-mid range.
• Pick 50 lb as the middle ground if you're not sure yet and want some headroom without paying for weight you're unlikely to use.
• Pick 60 lb if you already press, row or lunge with heavier dumbbells, or want the option to add the 10 lb kit later and reach 70 lb without a second purchase.
• Factor in the length at 18.5 inches, the QuickDraw is longer than the Bowflex 552 or NordicTrack's set — if you have a low bench or tight rack clearance, measure your specific movement before buying the heavier pair.

Who this fits

The QuickDraw's per-ceiling structure means you're choosing your top weight at purchase rather than buying one dumbbell that covers 5-60 lb by default. That makes it a good fit if you know your realistic ceiling and don't want to pay for range you won't use, and a slightly awkward fit if you're not sure yet how heavy you'll eventually lift.

Based on the specs above, it suits home gym users who prioritize durability and fast switch-based adjustment over the absolute lightest or most compact dumbbell, beginners who want room to grow into a heavier ceiling, and anyone who wants to drop-set without babying the equipment between sets. It's a weaker fit for strength athletes who need more than 60-70 lb per hand, or anyone who specifically wants the shortest possible dumbbell body at a given weight — the QuickDraw runs longer than the Bowflex 552 or NordicTrack's Select-a-Weight at comparable weights.

REP Fitness sells the QuickDraw 60 lb adjustable dumbbell pair direct at repfitness.com — its own site, not an affiliate link, since the Amazon listing for this specific pair could not be confirmed against a verified ASIN. For a fixed-body twist-handle alternative with one range per unit, see our NUOBELL and Pepin comparisons, or the full best adjustable dumbbells breakdown for how it stacks up directly against both the Bowflex dial and the PowerBlock selector-pin mechanisms specifically.

General home-gym planning information only, not professional training advice. Specifications and availability change — verify them with the manufacturer or retailer before buying.

Questions people also ask

What weight options does the REP QuickDraw come in?

REP sells it as four separate pairs by ceiling weight: 5-30, 5-40, 5-50 and 5-60 lb per hand, all in 2.5 lb increments using the Lock-N-Load steel switch (REP Fitness). You pick the ceiling that fits your training rather than buying one set that covers all four ranges.

How does the Lock-N-Load switch work?

Each weight plate has its own steel switch that flips up or down to lock or release it from the handle. You can flip switches one at a time for 2.5 or 5 lb changes, or flip several together for a quick 10 lb jump between exercises (REP Fitness). REP states the switch is cycle-tested past 100,000 uses.

Can you add more weight to the QuickDraw later?

Yes, on the 60 lb pair. A 10 lb add-on weight plate kit extends each dumbbell from 60 lb to 70 lb per hand (Amazon, REP Fitness) without replacing the base handle or switch mechanism. Lower-ceiling pairs (30/40/50 lb) don't have a published add-on path to 60 lb or higher — you'd buy the 60 lb pair outright for that range.

How durable is the QuickDraw if it gets dropped?

Garage Gym Reviews put the QuickDraw through drop tests from 18 inches up to more than 4 feet at multiple angles, including a roof-level drop, and reported the dumbbells and the plastic cradle both survived, calling them "tanks." REP backs that up with a lifetime warranty on material, functionality and workmanship defects, though the warranty is non-transferrable to a second owner.

What's actually plastic on an otherwise all-steel dumbbell?

Garage Gym Reviews' teardown notes the QuickDraw is mostly steel — nickel-plated steel handle, steel switches, two steel support rods — with a small number of plastic pieces built in specifically to reduce metal-on-metal wear between the plates and the switch mechanism. That's a deliberate wear-reduction part, not a structural weak point, but it's still plastic in the load path, unlike Ironmaster's fully metal Quick-Lock design.

How does the QuickDraw compare to the Bowflex SelectTech 552 and NordicTrack Select-a-Weight?

All three are one-motion adjustable systems, but they differ in mechanism and ceiling. The QuickDraw tops out at 60 lb per hand (70 lb with the add-on kit) using flip-switch Lock-N-Load plates; the Bowflex SelectTech 552 tops out at 52.5 lb using a rotating dial; NordicTrack's Select-a-Weight tops out around 55 lb using pin selectors. REP's is the only one of the three with a published lifetime warranty and independent drop-testing behind it — Garage Gym Reviews lists the Bowflex and NordicTrack warranties as shorter and limited by comparison.

Is the QuickDraw's knurling as aggressive as a barbell's?

No. Garage Gym Reviews describes the QuickDraw's knurling as noticeably more passive than an Olympic barbell's, which the reviewers actually count as a plus for dynamic dumbbell movements like snatches or fast supersets where an aggressive barbell-style knurl would chew up your hands. If you specifically want an aggressive, barbell-style grip, this isn't built for that; if you want a grip that's secure but comfortable through fast reps, the passive knurl is a deliberate choice, not an oversight.

How does the QuickDraw's mechanism compare to Ironmaster's screw-based system?

They solve the same problem in opposite ways. REP's Lock-N-Load switches flip in under a second per plate for a fast mid-set change, with a small amount of plastic built in to reduce wear. Ironmaster's Quick-Lock uses hand-turned locking screws with no plastic anywhere in the load path — slower to adjust, but Garage Gym Reviews rates it as the more indestructible of the two long-term. Pick REP's mechanism if you value speed between sets; pick Ironmaster's if you value an all-metal build and don't mind the slower changeover. See our [Ironmaster adjustable dumbbells](/adjustable-dumbbells/ironmaster-adjustable-dumbbells/) breakdown for its full spec sheet.